Cadet 8F2500-8 Manuale Utente Scaricare il pdf

240 Volt Models:

2F350

2F500

3F750

4F1000

5F1250

6F1500

8F2000

8F2500

10F2500

120 Volt Models:

2F500-1

3F750-1

4F1000-1

6F1500-1

208 Volt Models:

2F500-8

3F750-8

4F1000-8

5F1250-8

6F1500-8

8F2000-8

8F2500-8

Tools Required:

Phillips Screwdriver

Straight Screwdriver

Wire Strippers

Drill or Hammer

Drill Bits

4 Wood Screws

3 Wire Nuts

1 Strain Relief Connector

OWNER’S GUIDE

The Cadet

Electric Baseboard

General Safety Information

Keep For Future Reference

WARNING!

Turn the electrical power off at the electrical

panel board (circuit breaker or fuse box) and

lock or tag the panel board door to prevent

someone from turning on power while you

are working on the heater. Failure to do so

could result in serious electrical shock,

burns, or possible death.

1. Read all information labels. Verify that the electrical supply

wires are the same voltage as the heater.

2. All electrical work and materials must comply with the

National Electric Code (NEC), the Occupational Safety and

Health Act (OSHA), and all state and local codes.

3. The heater must be grounded to the grounding pigtail (cop-

per wire) provided.

4. If you need to install a new circuit or need additional wiring

information, consult a qualified electrician.

5. Protect electrical supply from kinks, sharp objects, oil,

grease, hot surfaces or chemicals.

6. WARNING

Overheating or fire may occur. DO NOT place the heater

behind doors.

7. WARNING

Fire or explosion may occur. DO NOT place heater in any

area where combustible vapors, gases, liquids, or exces-

sive lint or dust are present.

8. WARNING

Risk of Electrical Shock. Turn off all power at the electri-

cal panel board supplying power to the heater before

wiring your heater.

9. WARNING

Risk of Fire. Heater must be kept clear of all obstructions:

maintain a 12” minimum clearance in front and above the

heater with a 6” minimum on each side. Heaters must be

kept clean of lint, dirt and debris. (See Maintenance

Instructions)

• Oversized high temperature limit switch with full length

sensor for added safety

• Durable steel sheathed element with a lifetime warranty

• Rugged steel construction

Features & Benefits

TEL: 360-693-2505 Fax: 360-694-6939 P.O. Box 1675 Vancouver, WA 98668-1675

1 2 3 4

Sommario

Pagina 1 - Electric Baseboard

240 Volt Models: 2F3502F5003F7504F10005F12506F15008F20008F250010F2500120 Volt Models:2F500-13F750-14F1000-16F1500-1208 Volt Models:2F500-83F750-84F100

Pagina 2 - Installation Instructions

More than one baseboard heater can be wired inparallel on same circuit (Be sure to check nationaland local codes for safety requirements).Disconnect (

Pagina 3 - Operation & Maintenance

Thermostat Kit Wiring(Supply wire colors may vary. Our reference to colors assumes general stan-dards) BTF-1 (See Figure 8)Connect supply black wire

Pagina 4 - Troubleshooting Chart

WarrantyWarranty InformationMaintenance: For safer operation and to prolong the life of the heater, it is necessary to follow the maintenance instruct

Commenti su questo manuale

Nessun commento

Cadet 8F2500-8 Manuale Utente

Navigare online o scaricare Manuale Utente per no Cadet 8F2500-8. The Cadet Electric Baseboard Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi no Cadet 8F2500-8